MOLD VALIDATION / T1

T1 is a decision gate—not a photo of a sample.

A T1 trial should connect the mold, material, process and inspection result to a clear disposition: approve, correct, re-trial or investigate further.

QUICK ANSWER

A T1 mold trial records the first trial condition of a new or modified mold. The exact scope is agreed project by project, but a useful record connects sample identity, process settings, dimensional and appearance results, open issues, corrective actions and the approval decision.

What a useful T1 record should connect.

RecordWhat to captureWhy it matters
Mold and sample identityMold revision, cavity, material lot and sample labelPrevents comparisons between different conditions
Process conditionTemperature, pressure, time and other agreed settingsMakes the sample traceable to the machine condition
Dimensional resultCritical dimensions, datums, fixture and measurement methodSeparates part variation from measurement ambiguity
Appearance and functionSurface, color, texture, fit and functional checksCaptures buyer-visible acceptance requirements
Open issuesDefect location, likely cause, owner and corrective actionCreates a route to the next trial
DispositionApprove, conditional approval, rework or re-trialDefines what can happen next

“An approved sample should carry its process and measurement assumptions with it.”

CORRECTION LOOP

From result to repeatable approval.

The exact number of trials depends on the mold, part and issue. The important control is that each change is recorded and revalidated.

  1. 01 / REVIEW

    Confirm what was run, what was measured and which requirements were not met.

  2. 02 / CLASSIFY

    Separate mold, process, material, measurement and part-design causes before changing the tool.

  3. 03 / CORRECT

    Define the change, owner, expected effect and verification method.

  4. 04 / RE-TRIAL

    Run the agreed condition and compare against the prior result.

  5. 05 / RELEASE

    Connect the approved sample to the production process, inspection plan and open-risk record.

WHAT T1 DOES NOT PROVE

A sample is evidence for one condition, not every future run.

T1 does not automatically prove production capability, tool life, maintenance stability, material consistency, packaging protection or long-term dimensional capability. Those requirements need their own validation and control plan.

ABERY states the scope of the trial and the remaining production risks instead of treating a signed sample as the end of the project.

PROJECT INTAKE / DFM REVIEW

Send the T1 result and the decision that is blocked.

We will help separate the mold, process, material and measurement questions before the next correction.

3D / 2D filesResin or materialAnnual volumeCritical tolerancesTarget timingQuality documents

Tell us where the project is now.

Send the files you have. Missing information can be confirmed during review.

A-MOLD Project Inquiry

Business inquiries only. For large CAD files, include a secure Google Drive, Dropbox, OneDrive or WeTransfer link, or email tonney@a-mold.com after submitting.

WhatsApp