BUYER GUIDE / SUPPLIER VERIFICATION

Verify who owns the engineering, not only the export desk.

A Chinese mold supplier may be a factory, a trading company, or a hybrid with an engineering and quality team supported by partner workshops. The label matters less than who reviews DFM, controls the tool build, records the trial and owns corrective action.

ABERY engineering note
Updated November 20, 2026

Do not use one photo, one certificate or one price to decide. Map the actual project team and the evidence each party can produce.

QUICK ANSWER

Ask for the legal entity, facility address, equipment list, process flow, quality records, RFQ technical response, audit access and the person accountable for DFM and T1. Confirm whether machining, fitting, molding and inspection happen in-house or through named partners. Put the scope, change control and handover obligations in the RFQ and contract.

1. Separate the commercial entity from the manufacturing chain.

A trading company can provide useful sourcing, translation and project coordination. A factory can provide direct process control but may still subcontract plating, heat treatment, inserts or inspection. Neither label replaces a project-specific capability review.

The buyer should know which legal entity signs the contract, who owns the drawings, which site makes the mold, which site runs the trial and who responds if a corrective action is required.

Contract entityLegal name, bank account and quality-system scope.
EngineeringWho reviews DFM, Moldflow and mold design.
MachiningWhich site and equipment produce the tool.
MoldingWhich press and process team run T1 and production.
InspectionWho measures the part and signs the report.
Corrective actionWho owns repair, retrial and communication.

2. Ask questions that require process knowledge.

A generic capability statement can be copied. A project-specific answer is harder to fake. Ask how the supplier would review parting, gate location, cooling, ejection, steel and measurement access for the actual part.

Follow up with evidence: a sanitized DFM issue list, a mold layout, a T1 report, a CMM result or a maintenance record. The point is not to obtain confidential customer data; it is to see whether the supplier can explain how a decision was made.

  • Which part feature drives the mold structure?
  • What would change the cavity or steel recommendation?
  • How is the T1 sample measured?
  • What happens if the first trial fails?
  • Which records are delivered at handover?
  • Who signs the technical release?

3. Verify the facility without turning the audit into a showroom tour.

A live or recorded review should follow the proposed process. Ask to see the machine, toolroom area, inspection equipment and records relevant to the project. Check machine identification, maintenance condition, calibration and the workflow around the equipment.

If a visit is not possible, request a project-specific video walk-through, equipment list, calibration evidence and a live discussion with the engineer who would handle the project. A facility photo alone does not establish the manufacturing route.

IdentitySite name, address, legal entity and contact.
EquipmentMachine models, capacity and condition.
PeopleEngineering, quality and project owner.
RecordsCalibration, maintenance and inspection examples.
ProcessMaterial flow, tool flow and change control.
EscalationQuality issue and corrective-action path.

4. Normalize the quotation and the responsibility matrix.

Compare quotations only after the scope is aligned. The tool, steel, runner, surface, trial, inspection, documentation, freight, spare parts and warranty should be stated. A low price with unclear exclusions is not comparable.

State which party supplies the material, insert, hot-runner controller, gauge and packaging. If the supplier uses a partner workshop or subcontractor, define the approval and confidentiality rules before files are released.

  • Tooling and steel scope.
  • Trial and sample quantity.
  • Inspection and documentation.
  • Freight, packaging and spare parts.
  • Subcontractor and material sources.
  • Change, repair and warranty terms.

5. Use a staged verification decision.

A buyer does not need to resolve every question before an RFQ. Start with a technical response and document review, then verify the facility or process at the stage where the risk is material.

For a high-value tool, make the factory and record review a condition before steel release or final payment. For a transfer project, connect the verification to incoming inspection and the qualification trial.

  • Stage 1: RFQ and evidence review.
  • Stage 2: technical clarification.
  • Stage 3: facility or process verification.
  • Stage 4: T1 and record review.
  • Stage 5: production and handover approval.

Questions buyers ask before approving this scope.

Is a trading company automatically a bad mold supplier?
No. A trading company can coordinate a suitable manufacturing chain, but the buyer must identify the actual engineering, toolroom, molding and inspection responsibilities and verify the evidence.
What is the fastest way to check whether a supplier is a factory?
Ask for the legal entity, site address, equipment identification, process-specific technical answers and a live or recorded facility review. Cross-check the certificate scope and contract entity.
Should I require a factory audit before an RFQ?
Not always. Start with a technical and document review. Make the facility audit or project-specific verification a gate before steel release, final payment or production approval when the risk justifies it.
What should be in the responsibility matrix?
DFM, mold design, steel, machining, trial, material, inspection, packaging, freight, repair, warranty, confidentiality and handover should each have a named owner.

Need a project-specific answer?

Send the part, material, volume and stage. We will identify what can be confirmed before quotation or tooling.

Send the project

Keep the scope comparable.

The linked guides are written to support a project-specific supplier and tooling review.

PROJECT INTAKE / SUPPLIER VERIFICATION

Put the real project team under review.

Send the part, process and quality scope. We will help frame the technical, facility and responsibility questions that a supplier must answer.

Part filesProcessAnnual volumeQuality scopeAudit requirementTarget timing

Tell us where the project is now.

Send the files and context you have. Missing information can be confirmed during review.

A-MOLD Project Inquiry

Business inquiries only. For large files, include a secure Google Drive, Dropbox, OneDrive or WeTransfer link, or email tonney@a-mold.com after submitting.